Low Power SPDT Electromechanical Relay Switches (<10 Watts)
The Low Power SPDT Electromechanical Relay Switches (<10 Watts) route RF and microwave signals with electromechanical relay coaxial contacts — one input routed to either of two outputs. The relay mechanism gives the lowest insertion loss, best isolation and cleanest wideband behaviour of any switch technology, with latching (self-cut-off) and failsafe actuator styles, TTL control options where fitted, and lifecycles from one to five million operations.
Rated for signal-level routing up to 10 watts, these are optimized for minimal insertion loss and maximum isolation rather than thermal headroom. Connector options including SMA, Type N, 2.92 mm and 2.4 mm carry the DC-to-18 GHz workhorse band and higher-frequency variants to 26.5, 40, 50 and 52 GHz, so the switch follows the signal instead of limiting it. Position indicators, suppression diodes and D-Sub or panel control interfaces are available to drop these straight into test benches, satellite ground stations, radar test sets and transmitter redundancy systems.
Showing the single result

