High Power SP12T Terminated Electromechanical Relay Switches (>75 Watts)

The High Power SP12T Terminated Electromechanical Relay Switches (>75 Watts) route RF and microwave signals with electromechanical relay coaxial contacts — one input routed to any of twelve outputs. The relay mechanism gives the lowest insertion loss, best isolation and cleanest wideband behaviour of any switch technology, with latching (self-cut-off) and failsafe actuator styles, TTL control options where fitted, and lifecycles from one to five million operations.

Rated above 75 watts, with high-power models reaching 240-600 watts — reinforced contacts and larger contact gaps support hot-switch operation where the older power must not drop during switching. Unused ports are terminated into internal 50 Ω matched loads, so the switch presents a defined impedance at every port and open legs cannot create reflections in multi-port test or distribution systems. Connector options including SMA, Type N, 2.92 mm and 2.4 mm carry the DC-to-18 GHz workhorse band and higher-frequency variants to 26.5, 40, 50 and 52 GHz, so the switch follows the signal instead of limiting it. Position indicators, suppression diodes and D-Sub or panel control interfaces are available to drop these straight into test benches, satellite ground stations, radar test sets and transmitter redundancy systems.

Showing the single result